<div dir="ltr">150e1b404d2e3b49574ad57e485827be12270ab9<br><div><br></div><div>I believe this is HEAD, committed on 6th of March?</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Mar 12, 2018 at 6:23 PM, Marcin Wojtas <span dir="ltr"><<a href="mailto:mw@semihalf.com" target="_blank">mw@semihalf.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Frederik,<br>
<br>
Which commit ID of marvell-armada-wip you're building your binary from?<br>
<br>
Thanks,<br>
Marcin<br>
<div class="HOEnZb"><div class="h5"><br>
2018-03-12 17:22 GMT+01:00 Ard Biesheuvel <<a href="mailto:ard.biesheuvel@linaro.org">ard.biesheuvel@linaro.org</a>>:<br>
> On 12 March 2018 at 16:15, Frederik Lotter<br>
> <<a href="mailto:frederik.lotter@netronome.com">frederik.lotter@netronome.com</a><wbr>> wrote:<br>
>> Hi,<br>
>> I am getting CPU stall warnings when booting up using the EFI route. I<br>
>> suspect the PCIe interface, as the stall warning sometimes contain the probe<br>
>> function. Other times is seems to get further than PCIe init, but still<br>
>> stall interrupt handling.<br>
>> Here are some facts around my observation:<br>
>><br>
>> I have two sdcards for my Machiattobin board. They have identical kernels<br>
>> (4.16 rc5) with Ubuntu 16.04 rootfs. The one sdcard uses a uboot, DT and<br>
>> kernel boot. The second sdcard has EDKII, grub kernel boot. The EDKII build<br>
>> includes the device tree DTB (and DTS which I believe is unused) from the<br>
>> one used on the uboot sdcard.<br>
>><br>
>> EFI stub: Booting Linux Kernel...<br>
>> EFI stub: Using DTB from configuration table<br>
>> EFI stub: Exiting boot services and installing virtual address map...<br>
>> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081]<br>
>> [ 0.000000] Linux version 4.16.0-rc5-mbcin-netronome-2-<wbr>dirty<br>
>> (root@mcb1-cpt) (gcc version 5.4.0 20160609 (Ubuntu/Linaro<br>
>> 5.4.0-6ubuntu1~16.04.9)) #2 SMP PREEMPT Mon Mar 12 14:40:25 UTC 2018<br>
>> [ 0.000000] Machine model: Marvell 8040 MACHIATOBin<br>
>> [ 0.000000] efi: Getting EFI parameters from FDT:<br>
>> [ 0.000000] efi: EFI v2.70 by EDK II<br>
>> [ 0.000000] efi: SMBIOS 3.0=0xbfd00000 ACPI 2.0=0xb6760000<br>
>> MEMATTR=0xb8973418 RNG=0xbffdbf98<br>
>> [ 0.000000] random: fast init done<br>
>> [ 0.000000] efi: seeding entropy pool<br>
>> :<br>
>><br>
>> (I am using the latest EDKII master, the Marvell edk2-open-platform 17.10<br>
>> banch, with all the latest mv-ddr/ atf /etc....).<br>
>><br>
>> The DT data appear there in die EFI boot, but the PCIe interface fails, and<br>
>> results (I believe) in the CPU stall warnings:<br>
>><br>
>> [ 717.453025] INFO: rcu_preempt self-detected stall on CPU<br>
>> :<br>
>> :<br>
>> [ 717.589783] armada8k_pcie_probe+0x140/<wbr>0x240<br>
>> :<br>
>><br>
>> Other times, the pcie gets further:<br>
>><br>
>> [ 3.312127] PCI: OF: host bridge /cp0/pcie@f2600000 ranges:<br>
>> [ 3.317740] PCI: OF: IO 0xf9000000..0xf900ffff -> 0xf9000000<br>
>> [ 3.323692] PCI: OF: MEM 0xc0000000..0xdfffffff -> 0xc0000000<br>
>> [ 3.328915] random: crng init done<br>
>> [ 4.326158] armada8k-pcie f2600000.pcie: phy link never came up<br>
>> [ 4.332109] armada8k-pcie f2600000.pcie: Link not up after<br>
>> reconfiguration<br>
>> [ 4.339056] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00<br>
><br>
><br>
> To be brutally honest, the armada8k-pcie driver is a piece of junk,<br>
> and you're much better off using the generic ECAM driver, which now<br>
> includes special handling for the missing root port on Synopsys IP.<br>
><br>
> It also allows you to have both MMIO32 and MMIO64 regions, which can<br>
> be useful with some PCIe cards with large BARs<br>
><br>
> Could you try<br>
><br>
> compatible = "marvell,armada8k-pcie-ecam";<br>
><br>
> in the DT node, please?<br>
><br>
> (Before you do that, please check whether UEFI recognizes your PCI<br>
> hardware using the 'pci' command in the shell)<br>
><br>
><br>
>> [ 4.345705] pci_bus 0000:00: root bus resource [bus 00-ff]<br>
>> [ 4.351217] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus<br>
>> address [0xf9000000-0xf900ffff])<br>
>> [ 4.360741] pci_bus 0000:00: root bus resource [mem<br>
>> 0xc0000000-0xdfffffff]<br>
>> [ 4.367659] pci 0000:00:00.0: [11ab:0110] type 01 class 0x060400<br>
>> [ 4.373708] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]<br>
>> [ 4.380562] pci 0000:00:00.0: supports D1 D2<br>
>> [ 4.384853] pci 0000:00:00.0: PME# supported from D0 D1 D3hot<br>
>> [ 4.390697] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]),<br>
>> reconfiguring<br>
>> [ 4.398771] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01<br>
>> [ 4.405427] pci 0000:00:00.0: BAR 0: assigned [mem 0xc0000000-0xc00fffff<br>
>> 64bit]<br>
>> [ 4.412776] pci 0000:00:00.0: PCI bridge to [bus 01]<br>
>> [ 4.725111] pcieport 0000:00:00.0: Signaling PME with IRQ 56<br>
>> [ 4.730842] pcieport 0000:00:00.0: AER enabled with IRQ 56<br>
>><br>
>> but then CPUs are still stalled on some incoming IRQ<br>
>><br>
>> [ 87.352768] dump_backtrace+0x0/0x150<br>
>> [ 87.356445] show_stack+0x14/0x20<br>
>> [ 87.359773] sched_show_task+0x14c/0x170<br>
>> [ 87.363711] dump_cpu_task+0x40/0x50<br>
>> [ 87.367300] rcu_dump_cpu_stacks+0x94/0xd8<br>
>> [ 87.371412] rcu_check_callbacks+0x7ac/<wbr>0x980<br>
>> [ 87.375700] update_process_times+0x2c/0x58<br>
>> [ 87.379900] tick_sched_handle.isra.5+0x30/<wbr>0x50<br>
>> [ 87.384449] tick_sched_timer+0x40/0x90<br>
>> [ 87.388301] __hrtimer_run_queues+0x124/<wbr>0x198<br>
>> [ 87.392676] hrtimer_interrupt+0xe4/0x240<br>
>> [ 87.396701] arch_timer_handler_phys+0x30/<wbr>0x40<br>
>> [ 87.401163] handle_percpu_devid_irq+0x78/<wbr>0x130<br>
>> [ 87.405712] generic_handle_irq+0x24/0x38<br>
>> [ 87.409738] __handle_domain_irq+0x5c/0xb8<br>
>> [ 87.413850] gic_handle_irq+0x58/0xb0<br>
>> [ 87.417526] el1_irq+0xb0/0x128<br>
>> [ 87.420678] __do_softirq+0xb0/0x228<br>
>> [ 87.424267] irq_exit+0xbc/0xf0<br>
>> [ 87.427421] __handle_domain_irq+0x60/0xb8<br>
>> [ 87.431533] gic_handle_irq+0x58/0xb0<br>
>> [ 87.435209] el1_irq+0xb0/0x128<br>
>><br>
>> Is anyone aware of any issue like this?<br>
>><br>
>> Regards,<br>
>> Fred<br>
>><br>
>><br>
>> ______________________________<wbr>_________________<br>
>> Macchiato mailing list<br>
>> <a href="mailto:Macchiato@lists.einval.com">Macchiato@lists.einval.com</a><br>
>> <a href="https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato" rel="noreferrer" target="_blank">https://lists.einval.com/cgi-<wbr>bin/mailman/listinfo/macchiato</a><br>
><br>
> ______________________________<wbr>_________________<br>
> Macchiato mailing list<br>
> <a href="mailto:Macchiato@lists.einval.com">Macchiato@lists.einval.com</a><br>
> <a href="https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato" rel="noreferrer" target="_blank">https://lists.einval.com/cgi-<wbr>bin/mailman/listinfo/macchiato</a><br>
</div></div></blockquote></div><br></div>