[Macchiato] [EXT] McBin ~1.1 PCIe fix photographic evidence

[Matt Sealey]

Thankyouuuuu!

I understood the fix but I am having a hard time finding anyone who didn’t
just “abandon it for something newer and shinier” or “get a free new one
from marvell”

I bought mine personally so i don’t have Masa-san or Marvell bankrolling me
a new one.

Seeing a photo is more an exercise of actually finding anyone who isn’t in
the above two groups. Having a documented fix is one thing, knowing someone
did it is another :)

Does anyone know if the “use a bitcoin mining PCIe breakout” solution
implicitly fixed the issue directly or just through a fluke?

On Tue, Dec 19, 2017 at 12:54 Igal Liberman <igall at marvell.com> wrote:

> Hi Matt,
>
> You need to add pull down on pex_restout - 2kOhm resistor between
> CON12-A11 and CON12-A12 (attached a photo).
>
> Regards,
> Igal
>
> > -----Original Message-----
> > From: Macchiato [mailto:macchiato-bounces at lists.einval.com] On Behalf
> > Of Matt Sealey
> > Sent: Thursday, December 14, 2017 22:11
> > To: macchiato at lists.einval.com
> > Subject: [EXT] [Macchiato] McBin ~1.1 PCIe fix photographic evidence
> >
> > External Email
> >
> > ----------------------------------------------------------------------
> > Hi guys,
> >
> > Anyone got a picture evidence of modding the PCIe reset fix or did you
> all
> > just get new boards and burn the old ones on a pyre?
> >
> > Does anyone know if not-supplied-by-SolidRun DIMMs work here (and if
> > anyone sells mcbin without bundled RAM..) - this'd speak to the quality
> of
> > mv_ddr I guess, which since I don't have any different DIMMs, can't
> tell..
> >
> > Ta,
> > Matt
> >
> > _______________________________________________
> > Macchiato mailing list
> > Macchiato at lists.einval.com
> > https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20171219/3b70e68b/attachment.html>