[Macchiato] MacchiatoBin GPU progress [#freetimeproject]

Marcin Wojtas mw at semihalf.com
Tue Jun 6 06:53:32 BST 2017


Hi Matt,

2017-06-05 22:15 GMT+02:00 Matt Spencer <Matt.Spencer at arm.com>:
> Hi Ard
>
>
> So, I get about a 50% success rate on booting the board, taken from a sample
> of 12 boots, with 6 successful and 6 failed boots.  All conducted with the
> 16-1 riser with external power.
>
>
> Seems to always fail in about the same place.  I have attached boot logs
> from one successful, one full failure and 5 tails of the failed boot,
> hopefully this will shed some light on whats happening?
>
>
> I am using a pre-release uboot - I have one of the early hardware batches -
> could this be contributing to the problem?

Can you please upgrade your atf/mv_ddr to the newest versions:
https://github.com/MarvellEmbeddedProcessors/atf-marvell/commits/atf-v1.3-armada-17.06
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/commits/mv_ddr-armada-17.06

Also, although it should be less relevant here, you can use the newest u-boot
https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commits/u-boot-2017.03-armada-17.06

Please let know if you observe any improvement.

Best regards,
Marcin

>
>
> /Matt
>
> ________________________________
> From: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> Sent: 05 June 2017 13:19:31
> To: Matt Spencer
> Cc: Leif Lindholm; Wookey; Steve Capper; Steve McIntyre;
> macchiato at lists.einval.com
> Subject: Re: MacchiatoBin GPU progress [#freetimeproject]
>
> On 5 June 2017 at 12:17, Matt Spencer <Matt.Spencer at arm.com> wrote:
>> My card does seem to be detected every boot - although I have not rebooted
>> a
>> large number of times with the card in yet (maybe 5 or so?).  I can power
>> cycle it to see what the detection rates are like if that would help?
>>
>
> Yes, please. Could you try it with the riser power disconnected as well
> please?
>
>>
>> My 16->1 riser card is powered, as I didn't want to assume that the
>> motherboard would be configured to power a GPU - they can be hungry
>> beasts!
>>
>
> True.
>
>>
>> This is the riser that I am using:
>>
>> https://www.amazon.co.uk/gp/product/B01ER2Z1GY/ref=oh_aui_detailpage_o07_s00
>>
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy the
> information in any medium. Thank you.
>
> _______________________________________________
> Macchiato mailing list
> Macchiato at lists.einval.com
> https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
-------------- next part --------------
System info
firmware:
BootROM - 2.03
Starting CP-1 IOROM 1.07
Booting from SPI NOR flash 1 (0x32)
Found valid image at boot postion 0x000
lNOTICE:  Starting binary extension
NOTICE:  Gathering DRAM information
mv_ddr: mv_ddr-armada-17.02.0-g42da6da (Mar  9 2017 - 12:02:05)
mv_ddr: completed successfully
lBooting Trusted Firmware
BL1: v1.2(release):armada-17.02.0:2017.02-218-g1558a93
BL1: Built : 12:02:06, Mar  9 2017
NOTICE:  BL1: Booting BL2
lNOTICE:  BL2: v1.2(release):armada-17.02.0:2017.02-218-g1558a93
NOTICE:  BL2: Built : 12:02:06, Mar  9 2017
NOTICE:  BL1: Booting BL31
lNOTICE:  BL31: v1.2(release):armada-17.02.0:2017.02-218-g1558a93
NOTICE:  BL31: Built : 12:02:06, Mar  9 2017
uboot:
U-Boot 2015.01-armada-17.02.0 (Mar 09 2017 - 12:01:25)
aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2017.05-git-00218-g1558a93) 5.4.0
GNU ld (GNU Binutils) 2.26.1
kernel:
Linux version 4.4.52-devel-17.06.0-gb0ab589 (matt at matt-VirtualBox) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #2 SMP PREEMPT Thu May 18 22:45:06 BST 2017

Successful boot:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 4.4.52-devel-17.06.0-gb0ab589  (matt at matt-VirtualBox) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #2 SMP PREEMPT Thu May 18 22:45:06 BST 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd081]
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000ec000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc0ebf72000 s24832 r8192 d32512 u65536
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 967200
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootwait
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 14832(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xe3600000-0xe7600000] (64MB) mapped at [ffffffc0e3600000-ffffffc0e75fffff]
[    0.000000] Memory: 3713244K/3930240K available (8769K kernel code, 540K rwdata, 3092K rodata, 344K init, 266K bss, 151460K reserved, 65536K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0000000 - 0xffffffbdc3c00000   (    60 MB actual)
[    0.000000]     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0f0000000   (  3840 MB)
[    0.000000]       .init : 0xffffffc000c18000 - 0xffffffc000c6e000   (   344 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000c175f4   ( 11870 KB)
[    0.000000]       .data : 0xffffffc000c88000 - 0xffffffc000d0f200   (   541 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:160, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf0280000:0xf0280fff], SPI[160:192]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:192, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf0290000:0xf0290fff], SPI[192:224]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:224, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf02a0000:0xf02a0fff], SPI[224:256]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:256, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf02b0000:0xf02b0fff], SPI[256:288]
[    0.000000] mvebu-pic: registered with 19 irqs
[    0.000000] mvebu-sei: registered with 64 irqs
[    0.000000] Architected cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.000126] Console: colour dummy device 80x25
[    0.000138] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[    0.000144] pid_max: default: 32768 minimum: 301
[    0.000174] Security Framework initialized
[    0.000196] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000200] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000527] Initializing cgroup subsys memory
[    0.000541] Initializing cgroup subsys hugetlb
[    0.000673] EFI services will not be available.
[    0.000684] ASID allocator initialised with 65536 entries
[    0.036030] Detected PIPT I-cache on CPU1
[    0.036057] CPU1: Booted secondary processor [410fd081]
[    0.048036] Detected PIPT I-cache on CPU2
[    0.048063] CPU2: Booted secondary processor [410fd081]
[    0.060046] Detected PIPT I-cache on CPU3
[    0.060063] CPU3: Booted secondary processor [410fd081]
[    0.060095] Brought up 4 CPUs
[    0.060106] SMP: Total of 4 processors activated.
[    0.060112] CPU: All CPU(s) started at EL2
[    0.060378] devtmpfs: initialized
[    0.064029] DMI not present or invalid.
[    0.064153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064165] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.064953] xor: measuring software checksum speed
[    0.104066]    8regs     :  5211.000 MB/sec
[    0.144090]    8regs_prefetch:  4568.000 MB/sec
[    0.184115]    32regs    :  5983.000 MB/sec
[    0.224140]    32regs_prefetch:  4961.000 MB/sec
[    0.224144] xor: using function: 32regs (5983.000 MB/sec)
[    0.224155] pinctrl core: initialized pinctrl subsystem
[    0.224731] NET: Registered protocol family 16
[    0.244169] cpuidle: using governor ladder
[    0.264180] cpuidle: using governor menu
[    0.264252] vdso: 2 pages (1 code @ ffffffc000c8d000, 1 data @ ffffffc000c8c000)
[    0.264271] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.264766] DMA: preallocated 256 KiB pool for atomic allocations
[    0.264816] Serial: AMBA PL011 UART driver
[    0.360319] raid6: int64x1  gen()   944 MB/s
[    0.428352] raid6: int64x1  xor()   686 MB/s
[    0.496370] raid6: int64x2  gen()  1477 MB/s
[    0.564422] raid6: int64x2  xor()  1116 MB/s
[    0.632465] raid6: int64x4  gen()  1829 MB/s
[    0.700503] raid6: int64x4  xor()  1143 MB/s
[    0.768559] raid6: int64x8  gen()  2046 MB/s
[    0.836595] raid6: int64x8  xor()  1135 MB/s
[    0.904653] raid6: neonx1   gen()  1816 MB/s
[    0.972706] raid6: neonx1   xor()  1056 MB/s
[    1.040740] raid6: neonx2   gen()  2770 MB/s
[    1.108794] raid6: neonx2   xor()  1688 MB/s
[    1.176827] raid6: neonx4   gen()  3503 MB/s
[    1.244884] raid6: neonx4   xor()  2145 MB/s
[    1.312921] raid6: neonx8   gen()  3375 MB/s
[    1.380975] raid6: neonx8   xor()  2282 MB/s
[    1.380978] raid6: using algorithm neonx4 gen() 3503 MB/s
[    1.380981] raid6: .... xor() 2145 MB/s, rmw enabled
[    1.380984] raid6: using intx1 recovery algorithm
[    1.381346] reg-fixed-voltage cpn-110-master:usb3-vbus0: could not find pctldev for node /cpn-110-master/config-space/pinctrl at 440000/xhci0-vbus-pins, deferring probe
[    1.381730] arm-smmu f0100000.iommu: probing hardware configuration...
[    1.381735] arm-smmu f0100000.iommu: SMMUv2 with:
[    1.381740] arm-smmu f0100000.iommu:         stage 1 translation
[    1.381743] arm-smmu f0100000.iommu:         stage 2 translation
[    1.381747] arm-smmu f0100000.iommu:         nested translation
[    1.381751] arm-smmu f0100000.iommu:         coherent table walk
[    1.381756] arm-smmu f0100000.iommu:         stream matching with 16 register groups, mask 0x7fff
[    1.381760] arm-smmu f0100000.iommu:         8 context banks (0 stage-2 only)
[    1.381766] arm-smmu f0100000.iommu:         Supported page sizes: 0x60211000
[    1.381770] arm-smmu f0100000.iommu:         Stage-1: 48-bit VA -> 48-bit IPA
[    1.381773] arm-smmu f0100000.iommu:         Stage-2: 48-bit IPA -> 48-bit PA
[    1.381796] arm-smmu f0100000.iommu: registered 2 master devices
[    1.382706] vgaarb: loaded
[    1.382870] SCSI subsystem initialized
[    1.383067] usbcore: registered new interface driver usbfs
[    1.383093] usbcore: registered new interface driver hub
[    1.383129] usbcore: registered new device driver usb
[    1.383444] pps_core: LinuxPPS API ver. 1 registered
[    1.383448] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[    1.383462] PTP clock support registered
[    1.383641] dmi: Firmware registration failed.
[    1.384260] clocksource: Switched to clocksource arch_sys_counter
[    1.387921] NET: Registered protocol family 2
[    1.388183] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.388314] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.388492] TCP: Hash tables configured (established 32768 bind 32768)
[    1.388541] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.388568] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.388671] NET: Registered protocol family 1
[    1.388841] RPC: Registered named UNIX socket transport module.
[    1.388846] RPC: Registered udp transport module.
[    1.388850] RPC: Registered tcp transport module.
[    1.388853] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.389148] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.389390] kvm [1]: interrupt-controller at f0240000 IRQ7
[    1.389492] kvm [1]: timer IRQ5
[    1.389502] kvm [1]: Hyp mode initialized successfully
[    1.390931] audit: initializing netlink subsys (disabled)
[    1.390965] audit: type=2000 audit(1.384:1): initialized
[    1.391382] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.395446] VFS: Disk quotas dquot_6.6.0
[    1.395545] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.397062] NFS: Registering the id_resolver key type
[    1.397079] Key type id_resolver registered
[    1.397082] Key type id_legacy registered
[    1.397092] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[    1.397224] jffs2: version 2.2. (NAND) ?�� 2001-2006 Red Hat, Inc.
[    1.397494] fuse init (API version 7.23)
[    1.397742] 9p: Installing v9fs 9p2000 file system support
[    1.398299] async_tx: api initialized (async)
[    1.398317] io scheduler noop registered
[    1.398395] io scheduler cfq registered (default)
[    1.399231] armada-ap806-pinctrl f06f4000.pinctrl: registered pinctrl driver
[    1.399557] armada-cp110-pinctrl f2440000.pinctrl: registered pinctrl driver
[    1.399780] armada-cp110-pinctrl f4440000.pinctrl: registered pinctrl driver
[    1.399872] mvebu-gpio f06f5040.gpio: Couldn't get OF id
[    1.400099] irq: Cannot allocate irq_descs @ IRQ49, assuming pre-allocated
[    1.400299] irq: Cannot allocate irq_descs @ IRQ81, assuming pre-allocated
[    1.400482] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.401708] libphy: Fixed MDIO Bus: probed
[    1.401716] tun: Universal TUN/TAP device driver, 1.6
[    1.401719] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    1.401816] libphy: mdio_driver_register: mv88e6xxx
[    1.401933] libphy: orion_mdio_bus: probed
[    1.402010] libphy: orion_mdio_bus: probed
[    1.402102] libphy: Marvell XSMI MDIO Bus: probed
[    1.405747] libphy: Marvell XSMI MDIO Bus: probed
[    1.405849] sky2: driver version 1.30
[    1.406095] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.406098] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.406128] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    1.406131] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.406162] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[    1.406165] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.406192] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    1.406195] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    1.406230] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[    1.406233] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.406260] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    1.406262] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    1.406426] usbcore: registered new interface driver asix
[    1.406463] usbcore: registered new interface driver ax88179_178a
[    1.406487] usbcore: registered new interface driver cdc_ether
[    1.406510] usbcore: registered new interface driver net1080
[    1.406533] usbcore: registered new interface driver cdc_subset
[    1.406557] usbcore: registered new interface driver zaurus
[    1.406595] usbcore: registered new interface driver cdc_ncm
[    1.407020] mv_xor_v2 f0400000.dma_xor: Marvell Version 2 XOR driver
[    1.407332] mv_xor_v2 f0420000.dma_xor: Marvell Version 2 XOR driver
[    1.407546] mv_xor_v2 f0440000.dma_xor: Marvell Version 2 XOR driver
[    1.407786] mv_xor_v2 f0460000.dma_xor: Marvell Version 2 XOR driver
[    1.408031] mv_xor_v2 f26a0000.dma_xor: Marvell Version 2 XOR driver
[    1.408079] mv_xor_v2 f26c0000.dma_xor: Marvell Version 2 XOR driver
[    1.408132] mv_xor_v2 f46a0000.dma_xor: Marvell Version 2 XOR driver
[    1.408169] mv_xor_v2 f46c0000.dma_xor: Marvell Version 2 XOR driver
[    1.409878] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.410555] console [ttyS0] disabled
[    1.430710] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 13, base_baud = 12500000) is a 16550A
[    2.638907] console [ttyS0] enabled
[    2.643058] omap_rng f2760000.trng: initialization failed.
[    2.648665] omap_rng f4760000.trng: initialization failed.
[    2.654234] [drm] Initialized drm 1.1.0 20060810
[    2.658949] Unable to detect cache hierarchy from DT for CPU 0
[    2.665210] brd: module loaded
[    2.670515] loop: module loaded
[    2.674817] VFIO - User Level meta-driver version: 0.3
[    2.680398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.686964] ehci-pci: EHCI PCI platform driver
[    2.691453] ehci-platform: EHCI generic platform driver
[    2.696779] ehci-orion: EHCI orion driver
[    2.700870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.707090] ohci-pci: OHCI PCI platform driver
[    2.711579] ohci-platform: OHCI generic platform driver
[    2.717115] usbcore: registered new interface driver usb-storage
[    2.723415] mousedev: PS/2 mouse device common for all mice
[    2.729386] armada38x-rtc f4284000.rtc: rtc core: registered f4284000.rtc as rtc0
[    2.736980] i2c /dev entries driver
[    2.750884] armada_thermal f06f808c.thermal: Overheat threshold between 93..107
[    2.758312] armada_thermal f2400078.thermal: Overheat threshold between 92..107
[    2.765792] armada_thermal f4400078.thermal: Overheat threshold between 92..107
[    2.773274] md: linear personality registered for level -1
[    2.778794] md: raid0 personality registered for level 0
[    2.784135] md: raid1 personality registered for level 1
[    2.789476] md: raid10 personality registered for level 10
[    2.795070] md: raid6 personality registered for level 6
[    2.800412] md: raid5 personality registered for level 5
[    2.805752] md: raid4 personality registered for level 4
[    2.811278] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[    2.820398] sdhci: Secure Digital Host Controller Interface driver
[    2.826612] sdhci: Copyright(c) Pierre Ossman
[    2.831002] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.836793] xenon-sdhci f06e0000.sdhci: Fail to get Xenon PHY type. Use default eMMC 5.1 PHY
[    2.845395] xenon-sdhci f06e0000.sdhci: No vmmc regulator found
[    2.888269] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
[    2.896464] xenon-sdhci f2780000.sdhci: Failed to setup input clk: -517
[    2.903254] ledtrig-cpu: registered to indicate activity on CPUs
[    2.909616] usbcore: registered new interface driver usbhid
[    2.915219] usbhid: USB HID core driver
[    2.920059] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-ddr-rd at 840000
[    2.929539] coresight-axim f0840000.axim-ddr-rd: AXIM 4.0 2.0 initialized
[    2.936438] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-ddr-wr at 841000
[    2.945895] coresight-axim f0841000.axim-ddr-wr: AXIM 4.0 2.0 initialized
[    2.952734] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-sb-rd at 848000
[    2.953799] mmc0: MAN_BKOPS_EN bit is not set
[    2.957348] mmc0: new high speed MMC card at address 0001
[    2.957558] mmcblk0: mmc0:0001 8GME4R 7.28 GiB
[    2.957648] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
[    2.957733] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
[    2.957812] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB
[    2.994171] coresight-axim f0848000.axim-sb-rd: AXIM 4.0 2.0 initialized
[    3.000936] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-sb-wr at 849000
[    3.010304] coresight-axim f0849000.axim-sb-wr: AXIM 4.0 2.0 initialized
[    3.017059] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-cp-rd at 3c5000
[    3.027219] coresight-axim f23c5000.axim-cp-rd: AXIM 4.0 1.0 initialized
[    3.033973] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-cp-wr at 3c6000
[    3.044135] coresight-axim f23c6000.axim-cp-wr: AXIM 4.0 1.0 initialized
[    3.050886] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-ppv2-rd at 3c0000
[    3.061223] coresight-axim f23c0000.axim-ppv2-rd: AXIM 4.0 1.0 initialized
[    3.068150] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-ppv2-wr at 3c1000
[    3.078484] coresight-axim f23c1000.axim-ppv2-wr: AXIM 4.0 1.0 initialized
[    3.085411] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-hb1-rd at 3c8000
[    3.095657] coresight-axim f23c8000.axim-hb1-rd: AXIM 4.0 1.0 initialized
[    3.102497] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-hb1-wr at 3c9000
[    3.112743] coresight-axim f23c9000.axim-hb1-wr: AXIM 4.0 1.0 initialized
[    3.119584] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-cp-rd at 3c5000
[    3.129654] coresight-axim f43c5000.axim-cp-rd: AXIM 4.0 1.0 initialized
[    3.136407] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-cp-wr at 3c6000
[    3.146471] coresight-axim f43c6000.axim-cp-wr: AXIM 4.0 1.0 initialized
[    3.153223] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-ppv2-rd at 3c0000
[    3.163464] coresight-axim f43c0000.axim-ppv2-rd: AXIM 4.0 1.0 initialized
[    3.170391] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-ppv2-wr at 3c1000
[    3.180635] coresight-axim f43c1000.axim-ppv2-wr: AXIM 4.0 1.0 initialized
[    3.187563] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-hb1-rd at 3c8000
[    3.197720] coresight-axim f43c8000.axim-hb1-rd: AXIM 4.0 1.0 initialized
[    3.204560] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-hb1-wr at 3c9000
[    3.214715] coresight-axim f43c9000.axim-hb1-wr: AXIM 4.0 1.0 initialized
[    3.222007] NET: Registered protocol family 10
[    3.226955] sit: IPv6 over IPv4 tunneling driver
[    3.231874] NET: Registered protocol family 17
[    3.236369] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.249201] 8021q: 802.1Q VLAN Support v1.8
[    3.253438] 9pnet: Installing 9P2000 support
[    3.257766] Key type dns_resolver registered
[    3.262064] openvswitch: Open vSwitch switching datapath
[    3.267525] mpls_gso: MPLS GSO support
[    3.271637] registered taskstats version 1
[    3.276886] Btrfs loaded
[    3.285611] mac_addr 0:0:0:0:51:81
[    3.298611] mvpp2 f2000000.ppv22 eth0: Using device tree mac address 00:00:00:00:51:81
[    3.311976] mac_addr 0:0:0:0:0:4
[    3.325192] mvpp2 f4000000.ppv22 eth1: Using device tree mac address 00:00:00:00:00:04
[    3.333431] mac_addr 0:0:0:0:0:5
[    3.346482] mvpp2 f4000000.ppv22 eth2: Using device tree mac address 00:00:00:00:00:05
[    3.354727] mac_addr 0:0:0:0:0:6
[    3.367919] mvpp2 f4000000.ppv22 eth3: Using device tree mac address 00:00:00:00:00:06
[    3.376324] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.382460]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.387632]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.392913] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
[    3.399565] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.405081] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
[    3.414609] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf6efffff]
[    3.421730] iommu: Adding device 0000:00:00.0 to group 0
[    3.427715] pci 0000:01:00.0: reg 0x24: initial BAR value 0x00000000 invalid
[    3.435453] iommu: Adding device 0000:01:00.0 to group 1
[    3.440807] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    3.449826] iommu: Adding device 0000:01:00.1 to group 1
[    3.460374] pci 0000:00:00.0: BAR 15: no space for [mem size 0x0c000000 64bit pref]
[    3.468071] pci 0000:00:00.0: BAR 15: failed to assign [mem size 0x0c000000 64bit pref]
[    3.476113] pci 0000:00:00.0: BAR 14: no space for [mem size 0x01800000]
[    3.482850] pci 0000:00:00.0: BAR 14: failed to assign [mem size 0x01800000]
[    3.489932] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf60fffff]
[    3.496757] pci 0000:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
[    3.502971] pci 0000:01:00.0: BAR 1: no space for [mem size 0x08000000 64bit pref]
[    3.510578] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x08000000 64bit pref]
[    3.518534] pci 0000:01:00.0: BAR 3: no space for [mem size 0x02000000 64bit pref]
[    3.526140] pci 0000:01:00.0: BAR 3: failed to assign [mem size 0x02000000 64bit pref]
[    3.534094] pci 0000:01:00.0: BAR 0: no space for [mem size 0x01000000]
[    3.540740] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x01000000]
[    3.547735] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    3.554816] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    3.562247] pci 0000:01:00.1: BAR 0: no space for [mem size 0x00004000]
[    3.568892] pci 0000:01:00.1: BAR 0: failed to assign [mem size 0x00004000]
[    3.575887] pci 0000:01:00.0: BAR 5: assigned [io  0x1000-0x107f]
[    3.582030] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.587020] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    3.593361] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    3.600360] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.606922] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    3.613898] mv_xor_v2 f26a0000.dma_xor: Marvell Version 2 XOR driver
[    3.620582] mv_xor_v2 f26c0000.dma_xor: Marvell Version 2 XOR driver
[    3.627241] mv_xor_v2 f46a0000.dma_xor: Marvell Version 2 XOR driver
[    3.633900] mv_xor_v2 f46c0000.dma_xor: Marvell Version 2 XOR driver
[    3.640682] omap_rng f2760000.trng: Random Number Generator ver. 203b34c
[    3.647508] omap_rng f4760000.trng: Random Number Generator ver. 203b34c
[    3.656597] ahci-mvebu f2540000.sata: masking port_map 0x3 -> 0x2
[    3.662758] ahci-mvebu f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x2 impl platform mode
[    3.671854] ahci-mvebu f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    3.681092] scsi host0: ahci-mvebu
[    3.684715] scsi host1: ahci-mvebu
[    3.688229] ata1: DUMMY
[    3.690695] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 27
[    3.703230] ahci-mvebu f4540000.sata: masking port_map 0x3 -> 0x3
[    3.709397] ahci-mvebu f4540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.718501] ahci-mvebu f4540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    3.727792] scsi host2: ahci-mvebu
[    3.731387] scsi host3: ahci-mvebu
[    3.734931] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x100 irq 40
[    3.742891] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x180 irq 40
[    3.751021] xhci-hcd f4500000.usb3: xHCI Host Controller
[    3.756374] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 1
[    3.764079] xhci-hcd f4500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    3.772668] xhci-hcd f4500000.usb3: irq 41, io mem 0xf4500000
[    3.778772] hub 1-0:1.0: USB hub found
[    3.782556] hub 1-0:1.0: 1 port detected
[    3.786626] xhci-hcd f4500000.usb3: xHCI Host Controller
[    3.791968] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 2
[    3.799521] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.807900] hub 2-0:1.0: USB hub found
[    3.811681] hub 2-0:1.0: 1 port detected
[    3.816202] xenon-sdhci f2780000.sdhci: Fail to get Xenon PHY type. Use default eMMC 5.1 PHY
[    3.824787] xenon-sdhci f2780000.sdhci: No vmmc regulator found
[    3.868270] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
[    3.877244] armada38x-rtc f4284000.rtc: setting system clock to 2017-06-05 20:01:30 UTC (1496692890)
[    4.068275] ata4: SATA link down (SStatus 0 SControl 300)
[    4.073732] ata3: SATA link down (SStatus 0 SControl 300)
[    4.096267] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.188272] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.200379] ata2.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30010, max UDMA/133
[    4.207202] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.219849] ata2.00: configured for UDMA/133
[    4.224364] scsi 1:0:0:0: Direct-Access     ATA      ST500LM012 HN-M5 0010 PQ: 0 ANSI: 5
[    4.232822] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.240348] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    4.245666] sd 1:0:0:0: [sda] Write Protect is off
[    4.250517] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.283119]  sda: sda1 sda2
[    4.286373] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    4.291926] md: Waiting for all devices to be available before autodetect
[    4.298755] md: If you don't use raid, use raid=noautodetect
[    4.298788] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    4.298822] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    4.298975] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.299101] scsi host4: usb-storage 1-1:1.0
[    4.332825] md: Autodetecting RAID arrays.
[    4.336953] md: Scanned 0 and added 0 devices.
[    4.341418] md: autorun ...
[    4.344223] md: ... autorun DONE.
[    4.347830] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    4.403036] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.410748] VFS: Mounted root (ext4 filesystem) on device 8:1.
[    4.446865] devtmpfs: mounted
[    4.450000] Freeing unused kernel memory: 344K (ffffffc000c18000 - ffffffc000c6e000)
[    4.457806] Freeing alternatives memory: 72K (ffffffc000c6e000 - ffffffc000c80000)
[    4.856626] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[    4.873103] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.891363] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 16.04.2 LTS!

[    4.920430] systemd[1]: Set hostname to <macchiato>.
[    4.961630] random: systemd: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
[    4.972070] random: systemd: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
[    4.990351] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
[    4.991262] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
[    5.004620] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
[    5.020382] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
[    5.030372] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
[    5.040490] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
[    5.040609] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
[    5.346516] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    5.368322] systemd[1]: Reached target Encrypted Volumes.
[  OK  ] Reached target Encrypted Volumes.
[    5.384394] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    5.404363] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    5.428378] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    5.444343] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    5.460308] systemd[1]: Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems (Pre).
[    5.476425] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    5.492314] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    5.504306] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    5.520372] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    5.540359] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    5.556402] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    5.592509] systemd[1]: Starting Set console keymap...
         Starting Set console keymap...
[    5.604468] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    5.648563] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    5.665231] systemd[1]: Started Read required files in advance.
[  OK  ] Started Read required files in advance.
[    5.681518] systemd[1]: Starting Nameserver information manager...
         Starting Nameserver information manager...
[    5.697217] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    5.732485] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[    5.749291] systemd[1]: Mounting Huge Pages File System...
         Mounting Huge Pages File System...
[    5.764470] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    5.780366] systemd[1]: Reached target Sockets.
[  OK  ] Reached target Sockets.
[    5.805035] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    5.816376] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    5.829235] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    5.845231] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[    5.861332] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required st... nodes for the current kernel...
[    5.885977] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    5.904407] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.
[    5.920374] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Debug File System.
[    5.932634] systemd[1]: Started Set console keymap.
[  OK  ] Started Set console keymap.
[    5.940733] scsi 4:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 4
[    5.950636] systemd[1]: Started Load Kernel Modules.
[    5.950692] sd 4:0:0:0: [sdb] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[    5.951428] sd 4:0:0:0: [sdb] Write Protect is off
[    5.952168] sd 4:0:0:0: [sdb] No Caching mode page found
[    5.952171] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    5.955545]  sdb: sdb1
[    5.957665] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.979386] random: nonblocking pool is initialized
[  OK  ] Started Load Kernel Modules.
[    6.004631] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[    6.014258] systemd[1]: ureadahead.service: Unit entered failed state.
[    6.020865] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[    6.053148] systemd[1]: Started Load/Save Random Seed.
[  OK  ] Started Load/Save Random Seed.
[    6.070093] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[    6.093539] systemd[1]: Started Nameserver information manager.
[  OK  ] Started Nameserver information manager.
[    6.109478] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started udev Coldplug all Devices.
         Starting Flush Journal to Persistent Storage...
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Configuration File System...
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[    6.272094] systemd-journald[1308]: Received request to flush runtime journal from PID 1
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Raise network interfaces...
         Starting udev Kernel Device Manager...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target System Time Synchronized.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily apt activities.
[  OK  ] Reached target Timers.
[  OK  ] Started Trigger resolvconf update for networkd DNS.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
         Starting Permit User Sessions...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
[  OK  ] Started Regular background program processing daemon.
         Starting getty on tty2-tty6 if dbus and logind are not available...
         Starting System Logging Service...
[  OK  ] Started Permit User Sessions.
[  OK  ] Found device /dev/ttyS0.
         Starting Set console scheme...
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Set console scheme.
[  OK  ] Started ifup for eth2.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Found device /sys/subsystem/net/devices/eth2.
[  OK  ] Started getty on tty2-tty6 if dbus and logind are not available.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started System Logging Service.
[    8.833063] Call trace:
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
         Starting LSB: Start NTP daemon...
         Starting OpenBSD Secure Shell server...
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started Getty on tty6.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Getty on tty4.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty5.
[  OK  ] Started Getty on tty3.
[  OK  ] Started Getty on tty2.
[  OK  ] Reached target Login Prompts.
[  OK  ] Stopped LSB: Start NTP daemon.
         Starting LSB: Start NTP daemon...
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
[  OK  ] Started Stop ureadahead data collection 45s after completed startup.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ubuntu 16.04.2 LTS macchiato ttyS0

> lspci
00:00.0 PCI bridge: Marvell Technology Group Ltd. Device 0110
01:00.0 VGA compatible controller: NVIDIA Corporation Device 128b (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)

============================

The following were failed boot - full dump first, then the tail of the log


USB0:   Register 2000120 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
13169152 bytes read in 988 ms (12.7 MiB/s)
34916 bytes read in 158 ms (214.8 KiB/s)
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Using Device Tree in place at 0000000001000000, end 000000000100b863

Starting kernel ...

Timer summary in microseconds:
       Mark    Elapsed  Stage
          0          0  reset
  1,521,000  1,521,000  id=64
  1,874,000    353,000  id=65
  1,892,000     18,000  main_loop
  4,919,000  3,027,000  usb_start
  8,669,000  3,750,000  bootm_start
 11,945,000  3,276,000  id=15
 11,947,000      2,000  start_kernel
876,893,060,851,044,868,0876,893,060,849,850,168,0  board_init_f

Accumulated time:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 4.4.52-devel-17.06.0-gb0ab589  (matt at matt-VirtualBox) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #2 SMP PREEMPT Thu May 18 22:45:06 BST 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd081]
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000ec000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc0ebf72000 s24832 r8192 d32512 u65536
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 967200
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootwait
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 14832(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xe3600000-0xe7600000] (64MB) mapped at [ffffffc0e3600000-ffffffc0e75fffff]
[    0.000000] Memory: 3713244K/3930240K available (8769K kernel code, 540K rwdata, 3092K rodata, 344K init, 266K bss, 151460K reserved, 65536K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0000000 - 0xffffffbdc3c00000   (    60 MB actual)
[    0.000000]     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0f0000000   (  3840 MB)
[    0.000000]       .init : 0xffffffc000c18000 - 0xffffffc000c6e000   (   344 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000c175f4   ( 11870 KB)
[    0.000000]       .data : 0xffffffc000c88000 - 0xffffffc000d0f200   (   541 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:160, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf0280000:0xf0280fff], SPI[160:192]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:192, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf0290000:0xf0290fff], SPI[192:224]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:224, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf02a0000:0xf02a0fff], SPI[224:256]
[    0.000000] GICv2m: Overriding V2M MSI_TYPER (base:256, num:32)
[    0.000000] GICv2m: Node v2m: range[0xf02b0000:0xf02b0fff], SPI[256:288]
[    0.000000] mvebu-pic: registered with 19 irqs
[    0.000000] mvebu-sei: registered with 64 irqs
[    0.000000] Architected cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.000126] Console: colour dummy device 80x25
[    0.000138] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[    0.000144] pid_max: default: 32768 minimum: 301
[    0.000174] Security Framework initialized
[    0.000196] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000201] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000528] Initializing cgroup subsys memory
[    0.000542] Initializing cgroup subsys hugetlb
[    0.000675] EFI services will not be available.
[    0.000686] ASID allocator initialised with 65536 entries
[    0.036029] Detected PIPT I-cache on CPU1
[    0.036056] CPU1: Booted secondary processor [410fd081]
[    0.048036] Detected PIPT I-cache on CPU2
[    0.048062] CPU2: Booted secondary processor [410fd081]
[    0.060047] Detected PIPT I-cache on CPU3
[    0.060064] CPU3: Booted secondary processor [410fd081]
[    0.060096] Brought up 4 CPUs
[    0.060107] SMP: Total of 4 processors activated.
[    0.060112] CPU: All CPU(s) started at EL2
[    0.060379] devtmpfs: initialized
[    0.064028] DMI not present or invalid.
[    0.064152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064164] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.064946] xor: measuring software checksum speed
[    0.104065]    8regs     :  5213.000 MB/sec
[    0.144089]    8regs_prefetch:  4568.000 MB/sec
[    0.184113]    32regs    :  5983.000 MB/sec
[    0.224138]    32regs_prefetch:  4961.000 MB/sec
[    0.224141] xor: using function: 32regs (5983.000 MB/sec)
[    0.224152] pinctrl core: initialized pinctrl subsystem
[    0.224816] NET: Registered protocol family 16
[    0.236165] cpuidle: using governor ladder
[    0.256174] cpuidle: using governor menu
[    0.256247] vdso: 2 pages (1 code @ ffffffc000c8d000, 1 data @ ffffffc000c8c000)
[    0.256266] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.256760] DMA: preallocated 256 KiB pool for atomic allocations
[    0.256810] Serial: AMBA PL011 UART driver
[    0.352281] raid6: int64x1  gen()   943 MB/s
[    0.420336] raid6: int64x1  xor()   686 MB/s
[    0.488351] raid6: int64x2  gen()  1426 MB/s
[    0.556410] raid6: int64x2  xor()  1120 MB/s
[    0.624464] raid6: int64x4  gen()  1821 MB/s
[    0.692486] raid6: int64x4  xor()  1144 MB/s
[    0.760520] raid6: int64x8  gen()  2045 MB/s
[    0.828582] raid6: int64x8  xor()  1137 MB/s
[    0.896628] raid6: neonx1   gen()  1817 MB/s
[    0.964665] raid6: neonx1   xor()  1057 MB/s
[    1.032696] raid6: neonx2   gen()  2768 MB/s
[    1.100740] raid6: neonx2   xor()  1717 MB/s
[    1.168774] raid6: neonx4   gen()  3670 MB/s
[    1.236824] raid6: neonx4   xor()  2146 MB/s
[    1.304867] raid6: neonx8   gen()  3383 MB/s
[    1.372905] raid6: neonx8   xor()  2287 MB/s
[    1.372908] raid6: using algorithm neonx4 gen() 3670 MB/s
[    1.372911] raid6: .... xor() 2146 MB/s, rmw enabled
[    1.372914] raid6: using intx1 recovery algorithm
[    1.373288] reg-fixed-voltage cpn-110-master:usb3-vbus0: could not find pctldev for node /cpn-110-master/config-space/pinctrl at 440000/xhci0-vbus-pins, deferring probe
[    1.373664] arm-smmu f0100000.iommu: probing hardware configuration...
[    1.373669] arm-smmu f0100000.iommu: SMMUv2 with:
[    1.373673] arm-smmu f0100000.iommu:         stage 1 translation
[    1.373677] arm-smmu f0100000.iommu:         stage 2 translation
[    1.373680] arm-smmu f0100000.iommu:         nested translation
[    1.373685] arm-smmu f0100000.iommu:         coherent table walk
[    1.373689] arm-smmu f0100000.iommu:         stream matching with 16 register groups, mask 0x7fff
[    1.373694] arm-smmu f0100000.iommu:         8 context banks (0 stage-2 only)
[    1.373699] arm-smmu f0100000.iommu:         Supported page sizes: 0x60211000
[    1.373702] arm-smmu f0100000.iommu:         Stage-1: 48-bit VA -> 48-bit IPA
[    1.373706] arm-smmu f0100000.iommu:         Stage-2: 48-bit IPA -> 48-bit PA
[    1.373731] arm-smmu f0100000.iommu: registered 2 master devices
[    1.374648] vgaarb: loaded
[    1.374815] SCSI subsystem initialized
[    1.375019] usbcore: registered new interface driver usbfs
[    1.375047] usbcore: registered new interface driver hub
[    1.375086] usbcore: registered new device driver usb
[    1.375411] pps_core: LinuxPPS API ver. 1 registered
[    1.375416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[    1.375429] PTP clock support registered
[    1.375587] dmi: Firmware registration failed.
[    1.376175] clocksource: Switched to clocksource arch_sys_counter
[    1.379924] NET: Registered protocol family 2
[    1.380205] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.380315] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.380499] TCP: Hash tables configured (established 32768 bind 32768)
[    1.380550] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.380578] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.380678] NET: Registered protocol family 1
[    1.380811] RPC: Registered named UNIX socket transport module.
[    1.380816] RPC: Registered udp transport module.
[    1.380819] RPC: Registered tcp transport module.
[    1.380822] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.381102] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.381334] kvm [1]: interrupt-controller at f0240000 IRQ7
[    1.381430] kvm [1]: timer IRQ5
[    1.381440] kvm [1]: Hyp mode initialized successfully
[    1.382891] audit: initializing netlink subsys (disabled)
[    1.382910] audit: type=2000 audit(1.376:1): initialized
[    1.383291] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.387290] VFS: Disk quotas dquot_6.6.0
[    1.387376] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.388583] NFS: Registering the id_resolver key type
[    1.388605] Key type id_resolver registered
[    1.388608] Key type id_legacy registered
[    1.388619] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[    1.388749] jffs2: version 2.2. (NAND) ?�� 2001-2006 Red Hat, Inc.
[    1.389012] fuse init (API version 7.23)
[    1.389243] 9p: Installing v9fs 9p2000 file system support
[    1.389817] async_tx: api initialized (async)
[    1.389834] io scheduler noop registered
[    1.389913] io scheduler cfq registered (default)
[    1.390777] armada-ap806-pinctrl f06f4000.pinctrl: registered pinctrl driver
[    1.391103] armada-cp110-pinctrl f2440000.pinctrl: registered pinctrl driver
[    1.391308] armada-cp110-pinctrl f4440000.pinctrl: registered pinctrl driver
[    1.391401] mvebu-gpio f06f5040.gpio: Couldn't get OF id
[    1.391629] irq: Cannot allocate irq_descs @ IRQ49, assuming pre-allocated
[    1.391809] irq: Cannot allocate irq_descs @ IRQ81, assuming pre-allocated
[    1.391993] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.393146] libphy: Fixed MDIO Bus: probed
[    1.393154] tun: Universal TUN/TAP device driver, 1.6
[    1.393157] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    1.393259] libphy: mdio_driver_register: mv88e6xxx
[    1.393381] libphy: orion_mdio_bus: probed
[    1.393453] libphy: orion_mdio_bus: probed
[    1.393547] libphy: Marvell XSMI MDIO Bus: probed
[    1.397199] libphy: Marvell XSMI MDIO Bus: probed
[    1.397301] sky2: driver version 1.30
[    1.397553] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.397556] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.397586] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    1.397589] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.397618] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[    1.397621] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.397649] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    1.397653] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    1.397689] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[    1.397692] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.397719] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    1.397722] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    1.397883] usbcore: registered new interface driver asix
[    1.397919] usbcore: registered new interface driver ax88179_178a
[    1.397942] usbcore: registered new interface driver cdc_ether
[    1.397967] usbcore: registered new interface driver net1080
[    1.397990] usbcore: registered new interface driver cdc_subset
[    1.398014] usbcore: registered new interface driver zaurus
[    1.398052] usbcore: registered new interface driver cdc_ncm
[    1.398480] mv_xor_v2 f0400000.dma_xor: Marvell Version 2 XOR driver
[    1.398787] mv_xor_v2 f0420000.dma_xor: Marvell Version 2 XOR driver
[    1.399004] mv_xor_v2 f0440000.dma_xor: Marvell Version 2 XOR driver
[    1.399242] mv_xor_v2 f0460000.dma_xor: Marvell Version 2 XOR driver
[    1.399479] mv_xor_v2 f26a0000.dma_xor: Marvell Version 2 XOR driver
[    1.399527] mv_xor_v2 f26c0000.dma_xor: Marvell Version 2 XOR driver
[    1.399577] mv_xor_v2 f46a0000.dma_xor: Marvell Version 2 XOR driver
[    1.399613] mv_xor_v2 f46c0000.dma_xor: Marvell Version 2 XOR driver
[    1.401267] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.401940] console [ttyS0] disabled
[    1.422094] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 13, base_baud = 12500000) is a 16550A
[    2.630280] console [ttyS0] enabled
[    2.634417] omap_rng f2760000.trng: initialization failed.
[    2.640016] omap_rng f4760000.trng: initialization failed.
[    2.645582] [drm] Initialized drm 1.1.0 20060810
[    2.650298] Unable to detect cache hierarchy from DT for CPU 0
[    2.656572] brd: module loaded
[    2.661981] loop: module loaded
[    2.666317] VFIO - User Level meta-driver version: 0.3
[    2.671873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.678441] ehci-pci: EHCI PCI platform driver
[    2.682934] ehci-platform: EHCI generic platform driver
[    2.688266] ehci-orion: EHCI orion driver
[    2.692360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.698581] ohci-pci: OHCI PCI platform driver
[    2.703072] ohci-platform: OHCI generic platform driver
[    2.708613] usbcore: registered new interface driver usb-storage
[    2.714919] mousedev: PS/2 mouse device common for all mice
[    2.724905] armada38x-rtc f4284000.rtc: rtc core: registered f4284000.rtc as rtc0
[    2.732505] i2c /dev entries driver
[    2.746396] armada_thermal f06f808c.thermal: Overheat threshold between 93..107
[    2.753823] armada_thermal f2400078.thermal: Overheat threshold between 92..107
[    2.761304] armada_thermal f4400078.thermal: Overheat threshold between 92..107
[    2.768782] md: linear personality registered for level -1
[    2.774303] md: raid0 personality registered for level 0
[    2.779645] md: raid1 personality registered for level 1
[    2.784988] md: raid10 personality registered for level 10
[    2.790580] md: raid6 personality registered for level 6
[    2.795922] md: raid5 personality registered for level 5
[    2.801271] md: raid4 personality registered for level 4
[    2.806789] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[    2.815833] sdhci: Secure Digital Host Controller Interface driver
[    2.822051] sdhci: Copyright(c) Pierre Ossman
[    2.826433] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.832226] xenon-sdhci f06e0000.sdhci: Fail to get Xenon PHY type. Use default eMMC 5.1 PHY
[    2.840832] xenon-sdhci f06e0000.sdhci: No vmmc regulator found
[    2.884182] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
[    2.892358] xenon-sdhci f2780000.sdhci: Failed to setup input clk: -517
[    2.899136] ledtrig-cpu: registered to indicate activity on CPUs
[    2.905483] usbcore: registered new interface driver usbhid
[    2.911087] usbhid: USB HID core driver
[    2.915847] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-ddr-rd at 840000
[    2.925323] coresight-axim f0840000.axim-ddr-rd: AXIM 4.0 2.0 initialized
[    2.932162] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-ddr-wr at 841000
[    2.941614] coresight-axim f0841000.axim-ddr-wr: AXIM 4.0 2.0 initialized
[    2.948454] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-sb-rd at 848000
[    2.949724] mmc0: MAN_BKOPS_EN bit is not set
[    2.953300] mmc0: new high speed MMC card at address 0001
[    2.953518] mmcblk0: mmc0:0001 8GME4R 7.28 GiB
[    2.953602] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
[    2.953679] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
[    2.953759] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB
[    2.989869] coresight-axim f0848000.axim-sb-rd: AXIM 4.0 2.0 initialized
[    2.996632] of_graph_get_next_endpoint(): no port node found in /ap806/config-space/axim-sb-wr at 849000
[    3.006000] coresight-axim f0849000.axim-sb-wr: AXIM 4.0 2.0 initialized
[    3.012755] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-cp-rd at 3c5000
[    3.022914] coresight-axim f23c5000.axim-cp-rd: AXIM 4.0 1.0 initialized
[    3.029670] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-cp-wr at 3c6000
[    3.039830] coresight-axim f23c6000.axim-cp-wr: AXIM 4.0 1.0 initialized
[    3.046583] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-ppv2-rd at 3c0000
[    3.056916] coresight-axim f23c0000.axim-ppv2-rd: AXIM 4.0 1.0 initialized
[    3.063842] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-ppv2-wr at 3c1000
[    3.074178] coresight-axim f23c1000.axim-ppv2-wr: AXIM 4.0 1.0 initialized
[    3.081106] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-hb1-rd at 3c8000
[    3.091352] coresight-axim f23c8000.axim-hb1-rd: AXIM 4.0 1.0 initialized
[    3.098192] of_graph_get_next_endpoint(): no port node found in /cpn-110-master/config-space/axim-hb1-wr at 3c9000
[    3.108437] coresight-axim f23c9000.axim-hb1-wr: AXIM 4.0 1.0 initialized
[    3.115278] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-cp-rd at 3c5000
[    3.125345] coresight-axim f43c5000.axim-cp-rd: AXIM 4.0 1.0 initialized
[    3.132098] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-cp-wr at 3c6000
[    3.142163] coresight-axim f43c6000.axim-cp-wr: AXIM 4.0 1.0 initialized
[    3.148915] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-ppv2-rd at 3c0000
[    3.159157] coresight-axim f43c0000.axim-ppv2-rd: AXIM 4.0 1.0 initialized
[    3.166084] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-ppv2-wr at 3c1000
[    3.176324] coresight-axim f43c1000.axim-ppv2-wr: AXIM 4.0 1.0 initialized
[    3.183252] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-hb1-rd at 3c8000
[    3.193407] coresight-axim f43c8000.axim-hb1-rd: AXIM 4.0 1.0 initialized
[    3.200247] of_graph_get_next_endpoint(): no port node found in /cpn-110-slave/config-space/axim-hb1-wr at 3c9000
[    3.210404] coresight-axim f43c9000.axim-hb1-wr: AXIM 4.0 1.0 initialized
[    3.217695] NET: Registered protocol family 10
[    3.222597] sit: IPv6 over IPv4 tunneling driver
[    3.227502] NET: Registered protocol family 17
[    3.231993] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.244812] 8021q: 802.1Q VLAN Support v1.8
[    3.249046] 9pnet: Installing 9P2000 support
[    3.253373] Key type dns_resolver registered
[    3.257671] openvswitch: Open vSwitch switching datapath
[    3.263126] mpls_gso: MPLS GSO support
[    3.267231] registered taskstats version 1
[    3.272453] Btrfs loaded
[    3.281179] mac_addr 0:0:0:0:51:81
[    3.294422] mvpp2 f2000000.ppv22 eth0: Using device tree mac address 00:00:00:00:51:81
[    3.307813] mac_addr 0:0:0:0:0:4
[    3.320964] mvpp2 f4000000.ppv22 eth1: Using device tree mac address 00:00:00:00:00:04
[    3.329211] mac_addr 0:0:0:0:0:5
[    3.342367] mvpp2 f4000000.ppv22 eth2: Using device tree mac address 00:00:00:00:00:05
[    3.350615] mac_addr 0:0:0:0:0:6
[    3.363693] mvpp2 f4000000.ppv22 eth3: Using device tree mac address 00:00:00:00:00:06
[    3.372076] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.378215]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.383387]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.390144] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
[   24.404170] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.409868]  3-...: (1 GPs behind) idle=285/140000000000000/0 softirq=182/184 fqs=5251
[   24.417904]  (detected by 0, t=5255 jiffies, g=-208, c=-209, q=21)
[   24.424122] Task dump for CPU 3:
[   24.427363] kworker/u8:3    R  running task        0   450      2 0x00000002
[   24.434479] Workqueue: deferwq deferred_probe_work_func
[   24.439734] Call trace:
[   24.442194] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   24.447356] [<ffffffc0000f5af0>] console_unlock+0x1b8/0x4f0


=========== FAIL 2 =============

[    3.356577] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.362716]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.367888]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.374621] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
[   24.388246] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.393945]  0-...: (1 GPs behind) idle=7ab/140000000000000/0 softirq=173/174 fqs=5251
[   24.401981]  (detected by 2, t=5255 jiffies, g=-212, c=-213, q=21)
[   24.408200] Task dump for CPU 0:
[   24.411441] kworker/u8:4    R  running task        0  1018      2 0x00000002
[   24.418555] Workqueue: deferwq deferred_probe_work_func
[   24.423811] Call trace:
[   24.426271] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   24.431433] [<ffffffc0000f5af0>] console_unlock+0x1b8/0x4f0

=========== FAIL 3 =============

[    3.119526] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
[    3.119530] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.119535] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
[    3.119538] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf6efffff]
[    3.119751] iommu: Adding device 0000:00:00.0 to group 0
[    3.352446] mmc0: new high speed MMC card at address 0001
[    3.358090] mmcblk0: mmc0:0001 8GME4R 7.28 GiB
[    3.362735] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
[    3.368768] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
[    3.374801] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB
[   24.132244] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.137943]  2-...: (1 GPs behind) idle=eab/140000000000000/0 softirq=96/97 fqs=5251
[   24.145805]  (detected by 3, t=5252 jiffies, g=-232, c=-233, q=485)
[   24.152110] Task dump for CPU 2:
[   24.155351] kworker/u8:3    R  running task        0   152      2 0x00000002
[   24.162465] Workqueue: deferwq deferred_probe_work_func
[   24.167721] Call trace:
[   24.170181] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   24.175343] [<ffffffc0000cc284>] __queue_work+0x124/0x2a0
[   24.180765] [<ffffffc0000ecf74>] __wake_up+0x44/0x68
[   24.185750] [<ffffffc0000c9be0>] call_usermodehelper_exec+0xb8/0x178
[   24.192129] [<ffffffc0de91a130>] 0xffffffc0de91a130

=========== FAIL 4 =============

[    3.123503] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
[    3.123507] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.123512] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
[    3.123515] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf6efffff]
[    3.123727] iommu: Adding device 0000:00:00.0 to group 0
[    3.360348] mmc0: new high speed MMC card at address 0001
[   28.040153] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   28.045850]  2-...: (1 GPs behind) idle=f63/140000000000000/0 softirq=445/446 fqs=11
[   28.053711]  (detected by 0, t=6230 jiffies, g=-231, c=-232, q=449)
[   28.060018] Task dump for CPU 2:
[   28.063258] kworker/u8:1    R  running task        0    28      2 0x00000002
[   28.070371] Workqueue: deferwq deferred_probe_work_func
[   28.075627] Call trace:
[   28.078087] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   28.083248] [<ffffffc0000cc284>] __queue_work+0x124/0x2a0
[   28.088671] [<ffffffc0000ecf74>] __wake_up+0x44/0x68
[   28.093656] [<ffffffc0000c9be0>] call_usermodehelper_exec+0xb8/0x178
[   28.100036] [<ffffffc0e2572230>] 0xffffffc0e2572230

=========== FAIL 5 =============

[    3.362890] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.369031]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.374199]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.380951] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
[   24.392119] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.397816]  1-...: (1 GPs behind) idle=785/140000000000000/0 softirq=122/123 fqs=5251
[   24.405853]  (detected by 0, t=5252 jiffies, g=-207, c=-208, q=21)
[   24.412072] Task dump for CPU 1:
[   24.415313] kworker/u8:4    R  running task        0  1019      2 0x00000002
[   24.422427] Workqueue: deferwq deferred_probe_work_func
[   24.427682] Call trace:
[   24.430142] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   24.435303] [<ffffffc0000f5af0>] console_unlock+0x1b8/0x4f0

=========== FAIL 6 =============

[    3.130510] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.130523]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.130529]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.132101] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
[    3.329374] mmc0: new high speed MMC card at address 0001
[    3.335020] mmcblk0: mmc0:0001 8GME4R 7.28 GiB
[    3.339665] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
[    3.345702] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
[    3.351730] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB
[   24.136146] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.141845]  3-...: (1 GPs behind) idle=02b/140000000000000/0 softirq=402/413 fqs=5252
[   24.149880]  (detected by 2, t=5255 jiffies, g=-234, c=-235, q=385)
[   24.156185] Task dump for CPU 3:
[   24.159425] kworker/u8:1    R  running task        0    28      2 0x00000002
[   24.166540] Workqueue: deferwq deferred_probe_work_func
[   24.171797] Call trace:
[   24.174256] [<ffffffc000086cc4>] __switch_to+0x8c/0xa0
[   24.179418] [<ffffffc0000f40ac>] log_store+0x1f4/0x238
[   24.184576] [<ffffffc0000f5f70>] vprintk_emit+0x148/0x540
[   24.189998] [<ffffffc0005fc408>] dev_vprintk_emit+0xe0/0x1f0
[   24.195681] [<ffffffc0005fc560>] dev_printk_emit+0x48/0x50
[   24.201188] [<ffffffc0005fc608>] __dev_printk+0x38/0x78
[   24.206435] [<ffffffc0005fc7e8>] dev_err+0x50/0x58
[   24.211247] [<ffffffc00055a768>] armada8k_pcie_host_init+0x120/0x130
[   24.217630] [<ffffffc000ccc000>] pci_compat_driver+0x88/0xf8
[   24.223311] [<ffffffc0de945480>] 0xffffffc0de945480


More information about the Macchiato mailing list