[Macchiato] MacchiatoBin GPU progress [#freetimeproject]

[Matt Spencer]

Ok, installed the newer bootloader (with the updated mv_ddr) as per the instructions below.


Things are looking a lot better, although this could be because of the small sample size I have taken.


On a run of 10 boots, 9 success and 1 failure.  A snippet of the failure is:


[    3.452553] PCI host bridge /cpn-110-master/pcie at 0x600000 ranges:
[    3.458694]    IO 0xf9000000..0xf900ffff -> 0xf9000000
[    3.463865]   MEM 0xf6000000..0xf6efffff -> 0xf6000000
[    3.470658] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
[   24.484260] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   24.489960]  0-...: (1 GPs behind) idle=f3b/140000000000000/0 softirq=556/566 fqs=5251
[   24.497996]  (detected by 2, t=5255 jiffies, g=-209, c=-210, q=21)
[   24.504215] Task dump for CPU 0:
[   24.507456] kworker/u8:1    R  running task        0    29      2 0x00000002
[   24.514568] Workqueue: deferwq deferred_probe_work_func
[   24.519823] Call trace:
[   24.522283] [<ffffffc000086b70>] __switch_to+0x88/0xa0
[   24.527444] [<ffffffc0000f7688>] console_unlock+0x1b8/0x4c0
[   24.533040] [<ffffffc0000f7cd4>] vprintk_emit+0x344/0x540
[   24.538462] [<ffffffc000611b40>] dev_vprintk_emit+0xe0/0x1e8
[   24.544146] [<ffffffc000611c8c>] dev_printk_emit+0x44/0x50
[   24.549654] [<ffffffc000611d38>] __dev_printk+0x38/0x78
[   24.554902] [<ffffffc000611f18>] dev_err+0x50/0x58
[   24.559714] [<ffffffc000570360>] armada8k_pcie_host_init+0x120/0x130
[   24.566096] [<ffffffc000ced000>] pci_config_attr+0x30/0x38
[   24.571604] [<ffffffc0e0431880>] 0xffffffc0e0431880


So it looks like it is still a pcie issue.  But a step in the right direction?


I will run more boot tests when I have the time, but is there anything else you think I should try?


And is it possible for me to install firmware that will solve the BAR issues?


/Matt

________________________________
From: marcin wojtas <mw at semihalf.com>
Sent: 09 June 2017 08:32:53
To: Matt Spencer; ard.biesheuvel at linaro.org
Cc: Steve McIntyre; macchiato at lists.einval.com; Steve Capper; Leif Lindholm; Wookey; Igal Liberman; Neta Zur Hershkovits
Subject: ODP: [Macchiato] MacchiatoBin GPU progress [#freetimeproject]

Hi Matt,

Please try
http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+Bootloader

Please use newer atf/mv_ddr branches from edk2 build howto:
http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+UEFI+EDK+II

Best regards,
Marcin

Od: Matt Spencer<mailto:Matt.Spencer at arm.com>
Wysłano: czwartek, 8 czerwca 2017 23:32
Do: ard.biesheuvel at linaro.org<mailto:ard.biesheuvel at linaro.org>
DW: Marcin Wojtas<mailto:mw at semihalf.com>; Steve McIntyre<mailto:steve.mcintyre at arm.com>; macchiato at lists.einval.com<mailto:macchiato at lists.einval.com>; Steve Capper<mailto:Steve.Capper at arm.com>; Leif Lindholm<mailto:Leif.Lindholm at arm.com>; Wookey<mailto:wookey at arm.com>; Igal Liberman<mailto:igall at marvell.com>; Neta Zur Hershkovits<mailto:neta at marvell.com>
Temat: Re: [Macchiato] MacchiatoBin GPU progress [#freetimeproject]


So Ard, are you able to outline the process I need to undertake to update ATF and the bootloader?



/Matt

From: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Sent: 08 June 2017 20:06:21
To: Matt Spencer
Cc: Marcin Wojtas; Steve McIntyre; macchiato at lists.einval.com; Steve Capper; Leif Lindholm; Wookey; Igal Liberman; Neta Zur Hershkovits
Subject: Re: [Macchiato] MacchiatoBin GPU progress [#freetimeproject]

On 8 June 2017 at 17:25, Matt Spencer <Matt.Spencer at arm.com> wrote:
>
> Out of interest, what should I be seeing when I try and boot from sdcard?  I don't have anything valid on mine yet, but see this output:
>
>
> BootROM - 2.03
> Starting CP-0 IOROM 1.07
> Booting from SD 0 (0x29)
> Error: no valid header till end of media
> Error: Failed boot attempt 01. error = 0x041
>
> Which repeats four times until it gives up.  What should I be seeing?
>

Congratulations. You have managed to find a working micro-SD card on
the first try :-)
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20170609/bdf3fd1e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 102ABEA197B34924823404016C492B57.png
Type: image/png
Size: 284 bytes
Desc: 102ABEA197B34924823404016C492B57.png
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20170609/bdf3fd1e/attachment-0001.png>