[Macchiato] PCIe graphics card not detected

[Baruch Siach]

Hi Sumit,

Sumit Semwal writes:
> On Mon, 19 Nov 2018 at 19:26, Baruch Siach <baruch at tkos.co.il> wrote:
>> On Mon, Nov 12, 2018 at 09:07:04PM +0530, Sumit Semwal wrote:
>> > On Fri, 5 Oct 2018 at 12:41, Sumit Semwal <sumit.semwal at linaro.org> wrote:
>> > > I am running the mcbin single shot with latest debian and 4.19-rc7; my
>> > > problem is that the zotac gt710 graphics card seems to refuse to start
>> > > up - at boot, I get this:
>> > >
>> > > [    2.727091] armada8k-pcie f2600000.pcie: Phy link never came up
>> > > [    2.733053] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
>> > >
>> > > and lspci only shows the marvell controller, nothing else.
>> > >
>> > > Any help is highly appreciated!
>>
>> Please try the patch linked below:
>>
>>   http://patchwork.ozlabs.org/patch/978285/
>>
>> This should release the reset signal, unless your bootloader did that already.
>
> Thanks for the pointer; with this patch, the above warnings are gone.
> But lspci shows nothing at all now. I think the zotac is working ok,
> but I will probably have to find another CPU to put in there and test.

Can you test another PCIe card in the same slot?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -