[Macchiato] success (first boot)

[Thorsten Alteholz]

On Tue, 23 Jan 2018, Steve McIntyre wrote:
>> My problem now is that the network device driver is causing a kernel panic when
>> doing "apt install task-gnome-desktop". I get a lot of warning messages first
>> along the lines of "detected wrong cpu at end of Tx processing".
>
> Aha! Not just me then! I've been seeing the same 2 things for a while,
> but Leif and Stuart have not.

Neither did I see it after installing task-gnome-desktop:

[Mi Jan 17 19:57:26 2018] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[Mi Jan 17 19:57:29 2018] mvpp2 f4000000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
[Mi Jan 17 19:57:29 2018] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[Do Jan 18 10:08:35 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 10:21:00 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 10:38:10 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 10:44:52 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 10:46:47 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 10:47:40 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 11:29:33 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 11:36:58 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 11:49:29 2018] mmc0: Switching to 3.3V signalling voltage failed
[Do Jan 18 12:30:09 2018] mmc0: Switching to 3.3V signalling voltage failed
[Fr Jan 19 19:36:49 2018] mmc0: Switching to 3.3V signalling voltage failed
[Mo Jan 22 15:57:06 2018] mmc0: Switching to 3.3V signalling voltage failed
[Di Jan 23 09:54:11 2018] mmc0: Switching to 3.3V signalling voltage failed
[Di Jan 23 10:52:07 2018] mmc0: Switching to 3.3V signalling voltage failed
[Mi Jan 24 19:40:38 2018] fuse init (API version 7.26)

However I seem to have a problem with some voltage.
Linux arm64 4.14.0-2-arm64 #1 SMP Debian 4.14.7-1 (2017-12-22) aarch64 GNU/Linux


   Thorsten