[Macchiato] macchiatobin problem

[alpha_one_x86]

Hi Baruch Siach,

The CONFIG_SFP is enabled and eth0 SFP+ with 10G transceiver is working.

Checked via:

zcat /proc/config.gz | grep CONFIG_SFP
CONFIG_SFP=y

Cheers,


On 11/04/18 07:46, Baruch Siach wrote:
> Hi Alpha,
>
> alpha_one_x86 writes:
>> For now I run with this kernel without problem.
>>> Do you see your SFP module detected?
>>>
>>> Please send your full kernel log.
>> How I see this?
> You should see messages with the sfp-ethX: prefix.
>
>> See the attached file
> Your kernel log indicates that you don't enable CONFIG_SFP.
>
>>>> I try do work:
>>>>
>>>> https://www.fs.com/products/48929.html Cisco GLC-LH-SM-20 Compatible
>>>> 1000BASE-LX/LH SFP 1310nm 20km DOM Transceiver Module
>>>>
>>>> But failed, maybe not dynamically down to 1G.
>>> Recent mainline kernel can configure Ethernet port speed dynamically. I
>>> tested it here with 1G optic modules. The trouble is that SFP
>>> configuration is not always correct.
>>>
>> Can you send me more tips to have more info about this please?
>> And how see the SFP info as Db, power, ...?
> The ethtool -m command print provide the decoded information from the
> SFP module EEPROM, once you enable CONFIG_SFP.
>
> baruch
>
> --
>      http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
>

-- 
alpha_one_x86/BRULE Herman <alpha_one_x86 at first-world.info>
Main developer of Supercopier/Ultracopier/CatchChallenger, Esourcing and server management
IT, OS, technologies, research & development, security and business department

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20181104/45ba20fd/attachment.html>