[Macchiato] Current UEFI firmware stack?

[Marcin Wojtas]

Hi Jeremy,

I think you can safely use the mainline branches:
https://github.com/ARM-software/arm-trusted-firmware/commits/master
https://github.com/tianocore/edk2/commits/master
https://github.com/tianocore/edk2-platforms/commits/master
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/tree/mv_ddr-armada-atf-mainline
https://github.com/MarvellEmbeddedProcessors/binaries-marvell/tree/binaries-marvell-armada-18.12

I built the latter from the top of today's branches, and my
MacchiatoBin works properly with all peripherals. Here's the log:
https://pastebin.com/b2a0r7Kw

Please try above and share your log, so that we can figure out, what is wrong.

Best regards,
Marcin



pt., 29 mar 2019 o 23:16 Jeremy Linton <jeremy.linton at arm.com> napisał(a):
>
> Hi,
>
> What is the current set of recommended repo's/etc for building a UEFI
> stack?
>
> I picked up the latest tf-a/edk2-platforms and built them against the
> 18.12 marvell ddr & binaries repos, and put the resulting image on a SD
> card. The image booted to the BDS, but threw a number of very fatal
> looking errors (unable to find/start various efi drivers).
>
> Of course it appears neither SATA nor USB are working. I backed off to
> the marvell atf repo and that didn't appear to fix it either.
>
>
>
>
> _______________________________________________
> Macchiato mailing list
> Macchiato at lists.einval.com
> https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato