[Macchiato] Ubuntu Bionic 18.04.2 install issues on Macchiatto bin

[Riku Voipio]

Hi Marcin,

On Tue, 14 May 2019 at 18:48, Marcin Wojtas <mw at semihalf.com> wrote:

> wt., 14 maj 2019 o 17:03 <macchiattobin at kooman.org> napisał(a):
> >
> > On Tue, May 14, 2019 at 03:44:18PM +0200, Marcin Wojtas wrote:
> > > Hi Stefan,
> > >
> > > Can you please try the most recent build of edk2 (latest PCIE support
> > > upstream patches):
> > >
> https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/wiki/files/flash-image-mcbin-mainline-r20190509.bin
> > > ?
> > >
> > > Contrary to Marvell tree, here the DTB has the 'unused clocks' issue
> > > resolved, so I hope it helps in your case. Please let know, how it
> goes.
> >
> > It doesn't help with the Ubuntu installer unfortunately :/. It does help
> > with stable booting Debian (Buster) though. I've tested this on two
> > boards that with the older firmware giving pretty stable hangs ... with
> > the new firmware it boots perfectly without the need for
> > "clk_ignore_unused" kernel parameter.
> >
> > Gr. Stefan
> >
> > P.s. Marcin: Do you have detailed build instructions for building
> > "upstream"
> > ATF/MV_DDR/EDK2
>
> I plan to put it to wiki (once current and the next patchsets are
> merged in mainline), but for now I hope below will be sufficient:
>

For base platform I used debian stable (docker run debian:strech) with
following build-deps:

apt install --no-install-recommends crossbuild-essential-arm64
build-essential zip gcc-aarch64-linux-gnu uuid-dev python git
device-tree-compiler acpica-tools nasm


> mkdir edk2-workspace
> cd edk2-workspace
> export WORKSPACE=$PWD
>
> # Clone mv-ddr-marvell and set proper branch
> git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
> cd mv-ddr-marvell
> git checkout -b mv_ddr-armada-atf-mainline
> origin/mv_ddr-armada-atf-mainline
> cd -
>
> # Same for SCP_BL2 binaries:
> git clone
> https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
> cd binaries-marvell
> git checkout -b binaries-marvell-armada-18.12
> origin/binaries-marvell-armada-18.12
> cd -
>
> # Below repos will be automatically set to 'master' branches
> git clone https://github.com/ARM-software/arm-trusted-firmware.git
> git clone https://github.com/tianocore/edk2


inside edk2, one needs to:

git submodule update --init --recursive

to get latest openssl


>
> git clone https://github.com/tianocore/edk2-platforms.git
>
> make -C edk2/BaseTools/
> export PACKAGES_PATH=$PWD/edk2:$PWD/edk2-platforms
> source edk2/edksetup.sh
>
> # In case not building natively, export cross-compiler variable, e.g.:
> export
> GCC5_AARCH64_PREFIX=/opt/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> # Build edk2
> build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -p
> Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
>

This is as far as i got - the build of edk2 errors out with:

----
Generating FVMAIN_COMPACT FV
########################

build.py...
 : error F003: Output file for RAW section could not be found for
Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf
----

Slightly longer version of log at:

http://paste.debian.net/1081704/


export
> BL33=${WORKSPACE}/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
>
> # Build final binary and ARM-TF:
> cd arm-trusted-firmware
>
> # In case of cross-compiling
> export ARCH=arm64
> export
> CROSS_COMPILE=/opt/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>
> export SCP_BL2=${WORKSPACE}/binaries-marvell/mrvl_scp_bl2.img
> make USE_COHERENT_MEM=0 LOG_LEVEL=20
> MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell PLAT=a80x0_mcbin all fip
> export ARCH=
> cd -
>
> # Output binary (it can be burnt in SPI/SD/MMC) can be found in:
> ${WORKSPACE}/arm-trusted-firmware/build/a80x0_mcbin/release/flash-image.bin
>
> Best regards,
> Marcin
>
> _______________________________________________
> Macchiato mailing list
> Macchiato at lists.einval.com
> https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20190516/fa554297/attachment.html>