[Macchiato] Ubuntu Bionic 18.04.2 install issues on Macchiatto bin

[Riku Voipio]

Hi,

On Thu, 16 May 2019 at 13:24, Marcin Wojtas <mw at semihalf.com> wrote:

> Hi Riku,
>
> czw., 16 maj 2019 o 12:17 Riku Voipio <riku.voipio at linaro.org> napisał(a):
>
>> Hi Marcin,
>>
>> On Tue, 14 May 2019 at 18:48, Marcin Wojtas <mw at semihalf.com> wrote:
>>
>>> wt., 14 maj 2019 o 17:03 <macchiattobin at kooman.org> napisał(a):
>>> >
>>> > On Tue, May 14, 2019 at 03:44:18PM +0200, Marcin Wojtas wrote:
>>> > > Hi Stefan,
>>> > >
>>> > > Can you please try the most recent build of edk2 (latest PCIE support
>>> > > upstream patches):
>>> > >
>>> https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/wiki/files/flash-image-mcbin-mainline-r20190509.bin
>>> > > ?
>>> > >
>>> > > Contrary to Marvell tree, here the DTB has the 'unused clocks' issue
>>> > > resolved, so I hope it helps in your case. Please let know, how it
>>> goes.
>>> >
>>> > It doesn't help with the Ubuntu installer unfortunately :/. It does
>>> help
>>> > with stable booting Debian (Buster) though. I've tested this on two
>>> > boards that with the older firmware giving pretty stable hangs ... with
>>> > the new firmware it boots perfectly without the need for
>>> > "clk_ignore_unused" kernel parameter.
>>> >
>>> > Gr. Stefan
>>> >
>>> > P.s. Marcin: Do you have detailed build instructions for building
>>> > "upstream"
>>> > ATF/MV_DDR/EDK2
>>>
>>> I plan to put it to wiki (once current and the next patchsets are
>>> merged in mainline), but for now I hope below will be sufficient:
>>>
>>
>> For base platform I used debian stable (docker run debian:strech) with
>> following build-deps:
>>
>> apt install --no-install-recommends crossbuild-essential-arm64
>> build-essential zip gcc-aarch64-linux-gnu uuid-dev python git
>> device-tree-compiler acpica-tools nasm
>>
>>
>>> mkdir edk2-workspace
>>> cd edk2-workspace
>>> export WORKSPACE=$PWD
>>>
>>> # Clone mv-ddr-marvell and set proper branch
>>> git clone
>>> https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
>>> cd mv-ddr-marvell
>>> git checkout -b mv_ddr-armada-atf-mainline
>>> origin/mv_ddr-armada-atf-mainline
>>> cd -
>>>
>>> # Same for SCP_BL2 binaries:
>>> git clone
>>> https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
>>> cd binaries-marvell
>>> git checkout -b binaries-marvell-armada-18.12
>>> origin/binaries-marvell-armada-18.12
>>> cd -
>>>
>>> # Below repos will be automatically set to 'master' branches
>>> git clone https://github.com/ARM-software/arm-trusted-firmware.git
>>> git clone https://github.com/tianocore/edk2
>>
>>
>> inside edk2, one needs to:
>>
>> git submodule update --init --recursive
>>
>> to get latest openssl
>>
>>
>
> Thanks, I forgot about this step. I guess it may be related to the problem
> with .fd file generation. Can you please try to remove output directory (rm
> -rf ${WORKSPACE}/Build) and retry the clean build?
>

Still the same error. Full log at:

https://people.debian.org/~riku/mcbin/edk.log


> Best regards,
> Marcin
>
>
>>
>>> git clone https://github.com/tianocore/edk2-platforms.git
>>>
>>> make -C edk2/BaseTools/
>>> export PACKAGES_PATH=$PWD/edk2:$PWD/edk2-platforms
>>> source edk2/edksetup.sh
>>>
>>> # In case not building natively, export cross-compiler variable, e.g.:
>>> export
>>> GCC5_AARCH64_PREFIX=/opt/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>>>
>>> # Build edk2
>>> build -a AARCH64 -t GCC5 -b RELEASE -D INCLUDE_TFTP_COMMAND -p
>>> Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
>>>
>>
>> This is as far as i got - the build of edk2 errors out with:
>>
>> ----
>> Generating FVMAIN_COMPACT FV
>> ########################
>>
>> build.py...
>>  : error F003: Output file for RAW section could not be found for
>> Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf
>> ----
>>
>> Slightly longer version of log at:
>>
>> http://paste.debian.net/1081704/
>>
>>
>> export
>>> BL33=${WORKSPACE}/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
>>>
>>> # Build final binary and ARM-TF:
>>> cd arm-trusted-firmware
>>>
>>> # In case of cross-compiling
>>> export ARCH=arm64
>>> export
>>> CROSS_COMPILE=/opt/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
>>>
>>> export SCP_BL2=${WORKSPACE}/binaries-marvell/mrvl_scp_bl2.img
>>> make USE_COHERENT_MEM=0 LOG_LEVEL=20
>>> MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell PLAT=a80x0_mcbin all fip
>>> export ARCH=
>>> cd -
>>>
>>> # Output binary (it can be burnt in SPI/SD/MMC) can be found in:
>>>
>>> ${WORKSPACE}/arm-trusted-firmware/build/a80x0_mcbin/release/flash-image.bin
>>>
>>> Best regards,
>>> Marcin
>>>
>>> _______________________________________________
>>> Macchiato mailing list
>>> Macchiato at lists.einval.com
>>> https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.einval.com/pipermail/macchiato/attachments/20190516/6ae0f92f/attachment.html>