[Macchiato] Asus GT710 graphics card
Marcin Wojtas
mw at semihalf.com
Sat Mar 3 02:20:17 GMT 2018
Hi Stuart,
I am super-glad with the screenshot with graphic output you enclosed.
I will soon finally be able to test it on my own on new HW, but would
it be possible that your share a quick step-by-step howto with hints
and URLs to debian image you took, etc.?
Just for the heads up, next week please expect PCIE support and a fix
for variables when booting from SD card (now they will work only when
booting from SPI flash) available publicly - I'll update once done.
Thanks,
Marcin
2018-03-03 1:31 GMT+01:00 Stuart Monteith <stoo at stoo.me.uk>:
>
> I’m using linux-image-4.15.0-arm64 from straight Debian buster. It is using X, rather than Wayland.
>
> I find that the speckling is very much less when I turn off the compositor in Xfce.
>
> The modprobe options I find work are:
> options nouveau noaccel=1 runpm=0 nofbaccel=0 modeset=1
>
> Setting noaccel=0 results in a black screen.
>
>
>
> Stuart Monteith
> stoo at stoo.me.uk
>
>
>
>
> > On 3 Mar 2018, at 00:09, Matt Sealey <neko at bakuhatsu.net> wrote:
> >
> > For point of reference the nouveau driver in 4.9 (per Debian 9.3) had a terrible time on Juno but has become remarkably stable as of 4.15.3 - I found that Ubuntu Bionic installs beautifully - but I’ve not tried it on my McBin yet. I never saw any speckling in any case. I believe the runtime PM is disabled by default or at least that’s what my sysfs lead me to believe.
> >
> > I did have to tell GDM not to use Wayland. It’s super unstable... and much slower (which is odd to me since on x86 it is noticeably snappier than Xorg). But the tippy top GNOME works a treat!
> >
> >
> > On Fri, Mar 2, 2018 at 18:00 Stuart Monteith <stoo at stoo.me.uk> wrote:
> > Hi,
> > So, all the cool kids are running their Bins with a graphics card, so I’ve gone and tried the same:
> >
> > http://photos.stoo.me.uk/Lorca/first-lorca-screenshot.png
> >
> > So, some success.
> >
> > Initially I was just getting a black screen with a mouse pointer. Creating /etc/modprobe.d/nouveau.conf with the following contents worked somewhat:
> >
> > options nouveau noaccel=1 runpm=0 nofbaccel=1 modeset=1
> >
> > I suspect some more tweaking is in order.
> >
> > What I am finding is that there is speckling on the screen - single-pixel high horizontal lines of I’d guess around 32 pixels. These don’t appear in the screenshot (unsurprisingly).
> >
> > I’ve offered to test this configuration to see if there are lock ups, but I’d like to get rid of the speckling too. There are other issues with my setup, so this no doubt compounding the issues.
> > I also have a Kabylaby PC with a free PCI-e slot I might be able to compare against.
> >
> > It is quite nice that the HDMI audio works flawlessly - if YouTube in a browser works, then anything should work.,
> >
> >
> > BR,
> > Stuart
> >
> > Stuart Monteith
> > stoo at stoo.me.uk
> >
> >
> >
> >
> > _______________________________________________
> > Macchiato mailing list
> > Macchiato at lists.einval.com
> > https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
>
>
> _______________________________________________
> Macchiato mailing list
> Macchiato at lists.einval.com
> https://lists.einval.com/cgi-bin/mailman/listinfo/macchiato
More information about the Macchiato
mailing list