[Macchiato] Current UEFI firmware stack?

[Baruch Siach]

Hi Jeremy,

On Mon, Apr 01 2019, Jeremy Linton wrote:
>
> On 3/31/19 4:33 AM, Marcin Wojtas wrote:
>> I think you can safely use the mainline branches:
>> https://github.com/ARM-software/arm-trusted-firmware/commits/master
>> https://github.com/tianocore/edk2/commits/master
>> https://github.com/tianocore/edk2-platforms/commits/master
>> https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/tree/mv_ddr-armada-atf-mainline
>> https://github.com/MarvellEmbeddedProcessors/binaries-marvell/tree/binaries-marvell-armada-18.12
>> 
>> I built the latter from the top of today's branches, and my
>> MacchiatoBin works properly with all peripherals. Here's the log:
>> https://pastebin.com/b2a0r7Kw
>> 
>> Please try above and share your log, so that we can figure out, what is wrong.
>
> Yes, so I'm using the same repo's now, and its doing the same thing.
>
> https://paste.fedoraproject.org/paste/9Ya2Vu~C~U9R4tBCYtaBLA
>
> So either I have a build flag problem somewhere, or there is a problem 
> with booting the firmware from SD again? I'm still using the same build 
> flags as mentioned on the mcbin/UEFI page except for DEBUG instead of 
> RELEASE.

Some time ago I had to downgrade the toolchain to gcc-7 to build a
working EDK image.

  https://lists.einval.com/pipermail/macchiato/2018-November/000246.html

I haven't tried the latest version.

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -